Third graders will be hooked! A collection of science project ideas using everyday materials

Fly! Core Rocket

http://www.lemon8-app.com

Here’s how to make an easy “core rocket.” You’ll need a plastic wrap core, a toilet paper core, two rubber bands, and a straw.

First, cut the straw so it’s just a little longer than the opening of the toilet paper core.

Link the two rubber bands by looping them together.

Tape the rubber bands to the straw, then tape the straw onto the plastic wrap core with cellophane tape.

Once it’s set up so the toilet paper core can be launched, you’re done! Decorate the toilet paper core however you like to make your own original rocket.

Have fun and get creative!

expand_lessRaise the rankingexpand_morelower

kepiko

Report a problem

Making instruments with a plastic wrap core

No drill or cutter needed: Make instruments with a plastic wrap core [Crafts]

Let’s make a Chilean instrument that sounds like rain using a plastic wrap core! First, mark a bunch of toothpicks at the length of the wrap core so they match its length.

Next, cut the wrap core in a spiral.

Glue the cut toothpicks along the spiral using wood glue or similar adhesive.

Once you return the spiraled core to its original shape, seal the openings with duct tape.

Put in grains like mixed grains, different sizes of rice, beads, or beans.

After you cap it, your Chilean instrument, the rainstick, is complete!

expand_lessRaise the rankingexpand_morelower

kepiko

Report a problem

Making instruments with a plastic wrap core

No drill or cutter needed: Make instruments with a plastic wrap core [Crafts]

Let’s make a Chilean instrument that sounds like rain using a plastic wrap core! First, mark a bunch of toothpicks at the length of the wrap core so they match its length.

Next, cut the wrap core in a spiral.

Glue the cut toothpicks along the spiral using wood glue or similar adhesive.

Once you return the spiraled core to its original shape, seal the openings with duct tape.

Put in grains like mixed grains, different sizes of rice, beads, or beans.

After you cap it, your Chilean instrument, the rainstick, is complete!

expand_lessRaise the rankingexpand_morelower

kepiko

Report a problem

Extending Sword

Let's make a sword that extends using a calendar and a wrapping paper core!

Here’s how to make an extendable sword using a plastic wrap core and paper.

First, cut the core and use construction paper or similar to make the handle.

Next, make the blade with calendar paper.

Cut the paper so it’s as long as possible.

Roll it tightly so it fits inside the plastic wrap core.

Apply cellophane tape to the paper and adjust it so it matches the inside of the core, then stick it in place.

Once it’s the right size, you’re done! You can twist to extend and retract it for play.

Be careful not to pull it out too far.

expand_lessRaise the rankingexpand_morelower

kepiko

Report a problem

Let’s make a bow and arrow

How to make a bow and arrow from a single plastic wrap core (Beginner)

Here’s how to make a bow and arrow from a plastic wrap core! First, poke a hole in the center of the core, then make four vertical cuts along the tube.

Bend the cut middle sections inward on both sides.

Next, use rubber bands and twine to make the bow.

Hook a rubber band onto the indented part of the bow to finish it.

Make the arrows using a bamboo skewer and paper.

Since bamboo skewers are light, be sure to wrap them with paper.

Once your arrows are ready, set up a target and try it out.

You might be surprised at how far they fly.

Make sure small children are careful.

expand_lessRaise the rankingexpand_morelower

kepiko

Report a problem

A climbing ladybug!

Easy magnet craft! A climbing ladybug! Recycle plastic wrap and toilet paper cores! #crafts #handmadeToys #summerVacationCrafts #recycledCrafts

Here’s how to make a ladybug toy you can play with using magnets.

First, decorate a half-sphere of Styrofoam to look like a ladybug using pens or any materials you like.

Attach a magnet to the back of the ladybug with double-sided tape.

Next, flatten a toilet paper tube and cut it in half.

Use double-sided tape to fix the cut piece around a wooden stick to form a ring, then attach a magnet so it attracts the ladybug’s magnet.

Make a “tree” using a plastic wrap (cling film) tube, and insert the stick inside the tube.

When you move the stick up and down, the ladybug will move too! It’s also fun to make other bugs or your favorite characters instead of a ladybug, so give it a try!

expand_lessRaise the rankingexpand_morelower

kepiko

Report a problem

A climbing ladybug!

Easy magnet craft! A climbing ladybug! Recycle plastic wrap and toilet paper cores! #crafts #handmadeToys #summerVacationCrafts #recycledCrafts

Here’s how to make a ladybug toy you can play with using magnets.

First, decorate a half-sphere of Styrofoam to look like a ladybug using pens or any materials you like.

Attach a magnet to the back of the ladybug with double-sided tape.

Next, flatten a toilet paper tube and cut it in half.

Use double-sided tape to fix the cut piece around a wooden stick to form a ring, then attach a magnet so it attracts the ladybug’s magnet.

Make a “tree” using a plastic wrap (cling film) tube, and insert the stick inside the tube.

When you move the stick up and down, the ladybug will move too! It’s also fun to make other bugs or your favorite characters instead of a ladybug, so give it a try!

expand_lessRaise the rankingexpand_morelower

kepiko

Report a problem