Recommended for elementary students! A collection of fun craft ideas to make for 6th graders

Rubber band gun with two materials

[Recommended for summer vacation crafts!] How to make a rubber band gun with just two materials!!

Here’s a simple rubber band gun idea you can make with about three pairs of disposable chopsticks and around ten rubber bands.

Split all the chopsticks into single sticks; leave three as they are, and cut the rest into three different lengths.

If you use a utility knife for cutting, handle it with care.

It’s also a good idea to sand the cut edges for safety.

Combine the cut chopsticks to build the body, grip, and trigger, and finally create a notch at the front end of the body where the rubber band will hook.

The body tends to be long and unstable, so reinforce it by bracing it from below with shorter chopstick pieces.

expand_lessRaise the rankingexpand_morelower

sasashina

Report a problem

Paper slingshot made from origami and chopstick sleeves

Paper Pachinko: An Easy Way to Make One with Origami and Chopsticks — Kids Can Make It Too

A slingshot is a Y-shaped gadget used to launch pebbles or paper far into the distance.

At first glance it might seem like just a toy, but similar hunting tools have existed all over the world since ancient times.

The need to propel objects far is what gave rise to that shape.

Let’s try making such a slingshot using chopsticks.

The key to building a sturdy slingshot is reinforcing the space between the Y-shape with a toothpick.

There aren’t any particularly difficult steps, so even younger elementary school children should be able to make it.

You can switch up what you launch—paper, stones, clay, slime, and more—and turn it into a science project-style exploration.

Making instruments with a plastic wrap core

No drill or cutter needed: Make instruments with a plastic wrap core [Crafts]

Let’s make a Chilean instrument that sounds like rain using a plastic wrap core! First, mark a bunch of toothpicks at the length of the wrap core so they match its length.

Next, cut the wrap core in a spiral.

Glue the cut toothpicks along the spiral using wood glue or similar adhesive.

Once you return the spiraled core to its original shape, seal the openings with duct tape.

Put in grains like mixed grains, different sizes of rice, beads, or beans.

After you cap it, your Chilean instrument, the rainstick, is complete!

expand_lessRaise the rankingexpand_morelower

kepiko

Report a problem

Making instruments with a plastic wrap core

No drill or cutter needed: Make instruments with a plastic wrap core [Crafts]

Let’s make a Chilean instrument that sounds like rain using a plastic wrap core! First, mark a bunch of toothpicks at the length of the wrap core so they match its length.

Next, cut the wrap core in a spiral.

Glue the cut toothpicks along the spiral using wood glue or similar adhesive.

Once you return the spiraled core to its original shape, seal the openings with duct tape.

Put in grains like mixed grains, different sizes of rice, beads, or beans.

After you cap it, your Chilean instrument, the rainstick, is complete!

expand_lessRaise the rankingexpand_morelower

kepiko

Report a problem

Easy! A chopstick rubber band gun that can even use hair ties

http://www.lemon8-app.com

This rubber band gun made from disposable chopsticks is very simple—you just bundle the chopsticks together and fasten them with rubber bands.

First, stack four chopsticks and secure them in two places with rubber bands.

To catch the rubber band that will serve as the projectile, leave the top and bottom sticks of the four sticking out a bit longer.

Attach a clothespin together with the topmost rubber band at the rear.

The rubber band projectile is gripped by both the clothespin and the chopsticks; when you pull the clothespin, the band shoots out.

Try using a hair tie as the projectile—it won’t hurt much even if it hits you.

expand_lessRaise the rankingexpand_morelower

Hirakawa Masako (Bōkarisuto: Sakata Mizumako)

Report a problem