RAG MusicScience
Wonderful independent research

Crafts parents and kids can enjoy together. Recommended craft ideas to keep children entertained.

Here are some recommended craft ideas that parents and kids can enjoy together!

When you hear “crafts,” you might think of summer vacation homework.

But crafts are also perfect for everyday play and passing the time at home!

With common household items like plastic bottles, milk cartons, cardboard, and clay, you can make all kinds of fun creations.

You can have a blast making them with your child, play with what you’ve made, or even exchange your creations as gifts with each other…

You’re sure to share lots of fun moments!

These ideas will captivate both adults and kids, so be sure to enjoy them together as a family!

Crafts that parents and children can enjoy together. Recommended craft ideas to keep kids entertained (91–100)

Remaking a 100-yen shop clock

@broccoli_family

Remake a 100-yen shop clock! Clip clock 👍✨Summer Vacation Craft#Summer Vacation Workshop#100-yen shop DIY#100-yen shop arrangement

Original Song – Nanmo-kun – Broccoli Family

The part you can see from the back of a table clock or wall clock—the section with the battery compartment and the knob for setting the time—is called the movement.

You could say it’s the heart of the clock.

In fact, clock movements are sold on their own at 100-yen shops and home improvement stores, and you can use them to make your own original clock! If you’re good at woodworking, try starting from scratch by buying a wooden board and cutting a groove to fit the movement.

If that’s not your strong suit, there are also assembly kits with pre-cut grooves available, so you can use those instead.

Let’s learn about sugar crystallization while making canelés.

Let’s make an experimental piece using a canelé mold for sweets.

Put powdered gelatin into a container filled with water and heat it in the microwave.

After heating, add sugar, color it with edible food coloring, and heat it in the microwave again.

Pour it into the canelé mold, and once it sets, remove it from the mold.

Your beautiful, colorful sugar canelés are ready.

At first, they look jiggly, but after a week, the sugar crystallizes and they turn into sparkly, crystal-like pieces.

You can enjoy watching the sugar change over time.

Crafts parents and kids can enjoy together. Recommended craft ideas to keep children entertained (101–110)

Cake-shaped accessory case

@hoikushisatomi

[Even kids can make it] Cake-like trinket box 🍰Seasonal craftsChildcare ideasLife with childrenNursery teacher / Childcare worker#Creative PlayKids will love itChildren's Day#crafts#craftkids

♫ Winter Maple Leaves – Sasa.

Here’s an idea for a cake-themed trinket holder made with paper cups.

First, take one paper cup and cut straight from the rim down to the base, then cut out the base as well.

Use this as the template base, and decorate it by attaching felt or construction paper to make it look like a cake.

Once you’ve finished decorating the base, attach it to another paper cup, and you’re done.

It’s easy and cute, and you can customize the decoration however you like—highly recommended! With a bit more effort, you can even add a lid to the trinket holder, so give that a try if you have the time.

Refreshing! Square Bag

@n.annlee321

A cool-looking square bag design 💕 Perfect for a summer vacation craft project, too 🥰🫶✨#100-yen-shop#100-yen shop DIY#Summer VacationSummer Vacation CraftDaiso

♬ Good luck to me tomorrow – NANAOAKARI

Here’s an idea for making a bag using bag hardware from a 100-yen shop, plant pot mesh, and yarn in your favorite color and material.

First, cut the plant pot mesh to match the size of the bag hardware, then crochet or stitch the yarn onto the mesh.

Once you’ve finished attaching the yarn, sew the mesh and the bag hardware together.

Finally, add the handles and your favorite decorations to complete the bag.

With this method as a reference, it seems like you could create all kinds of items depending on your ideas!

Milk Carton Rolling Tower

@silk_haru3mama

[Summer Vacation Craft/Independent Study] I made a rolling ball tower out of a milk carton 🌻#Summer VacationSummer Vacation Independent ResearchSummer Vacation Crafttranslation#HandmadeToysworkIndependent ResearchScrap Material CraftingSimple craft#AtHomePlay#craft

♬ Electro Swing Jazz – Retro, strange, mysterious(1137053) – Ponetto

Let’s reuse empty milk cartons to make a fun rolling tower where a ping-pong ball tumbles down! Cut the milk cartons and connect two of them to create a long cylindrical base.

Make holes and slits in paper plates, attach them in a stepped arrangement, and adjust the angles so the ball rolls smoothly through.

Add slits to the side of the cylinder so the ball won’t stop midway and will drop all the way to the bottom.

If you wrap the whole thing with a tube-shaped cover made from a clear file, the ball won’t fly out and it’s safer to play with.

A bonus is that kids can learn about gravity and incline through the speed of the rolling ball and the fun sounds it makes.

It’s an eco-friendly idea that uses recycled materials to create a moving, interactive project.

A piggy bank that helps you save while having fun

Let’s use Daiso’s 3-tier drawer case to make a fun, game-like piggy bank over summer break.

First, flip the second and third drawers upside down and reassemble them so the flat sides face the front.

Next, cut corrugated plastic (plastic cardboard) into any shapes you like and attach it to the outside of the drawers to create a design that looks great.

Inside, apply double-sided tape so coins pause partway and drop slowly as they travel down.

With a piggy bank you made yourself, saving money becomes fun and easier to turn into a habit.

It’s a unique, practical idea that can change your everyday life through creativity and ingenuity.

desk lamp

@gakky_07

How about this for your summer vacation project?Summer Vacation Craft#Summer VacationDesk lamp

♬ Fun Isono Family / Sazae-san [Cover] – Sound Works

Here’s an idea for making a desk lamp that uses a magnet-mountable LED light.

The stand is entirely wooden, and the arm is movable so you can adjust the angle.

First, think about what size you want and what kind of structure you’re aiming for, and try drawing a design plan.

Once the plan is ready, figure out the lengths and quantities of wood you’ll need and source the materials.

These days, you can even find small pieces of wood at 100-yen shops, so those might work as well.

One of the joys of woodworking is choosing the finish—whether to go for a natural look with varnish or oil, or paint it your favorite color—so definitely consider a variety of options.